Technical data
Unimog implement carrier

Technical data

Everything including engines, dimensions, axles and fuel tank volumes, as well as approach and departure angles.

In this area, we will provide you with information about technical details of all model variants of the Unimog implement carrier – starting with the engines and the dimensions, right up to axles and fuel tank volumes, as well as approach and departure angles.

You will also find further technical information and illustrations in the digital product information:

Content technical data 01
 
Compare the models here.
Model variant C 405.090 C 405.104
Wheelbase 2.800 mm 3.000 mm
Engine (Euro VI) OM 934 OM 934
Output kW/hp 140/190 140/190
Maximum torque speed (1/min) 750/1.200–1.600 750/1.200–1.600
Clutch Single-plate dry clutch SAE-2 Ø mm, pressed Single-plate dry clutch SAE-2 Ø mm, pressed
Transmissions UG 100/8 with integrated transfer case UG 100/8 with integrated transfer case
Axles Link-located portal axles with coil springs Link-located portal axles with coil springs
front axle AU 4/3 CS 5,1 AU 4/3 CS 5,1
Rear axle HU 4/3 CS 5,5 HU 4/3 CS 5,5
Electrics 24 V 24 V
Battery capacity 140 Ah 140 Ah
Tank volume (fuel tank) (standard/optional) 145 l 145 l
Tank volume (AdBlue) 18 l 25 l
Steering with max. steering pressure ZF 8095/170 bar ZF 8095/170 bar
Brakes Pneumatic disc brakes Pneumatic disc brakes
Smallest tyres (tyre/rim) 295/60 R22,5 295/60 R22,5
Biggest tyres (tyre/rim) 425/75 R20 425/75 R20
Drive type (permanent all-wheel drive) 4 × 4 4 × 4
Perm. GVW (max. with relevant optional extras) 10,0 t 11,0 t
Max. weight on front axle 5,2 t 5,5 t
Max. weight on rear axle 5,5 t 6,0 t
Angle of approach with biggest tyres 25° 27°
Turning circle 12,6 m 13,7 m
Minimum vehicle dimensions (length × width × height) 4.900 × 2.150 × 2.820 mm 5.100 × 2.150 × 2.870 mm
Dump body interior dimensions 2.200 × 2.075 × 400 mm 2.385 × 2.075 × 400 mm
Road speed 89 km/h1016 89 km/h1016
 
Compare the engines here.
Model variant 934.971 934.972
Output according to DIN (kW/hp) 140/190 170/231
Number of cylinders/arrangement 4 Vertical in-line 4 Vertical in-line
Operating principle 4-stroke diesel direct injection 4-stroke diesel direct injection
Total displacement (cubic centimetres) 5.132 5.132
Injection pressure (bar) Until 2.400 Until 2.400
Compression ratio 17,6 : 1 17,6 : 1
Max. torque (Nm) 750 900
Torque increase (%) 33 22
Fan drive Hydrostatic Hydrostatic

Find your local Unimog dealer and have a chat about your specific requirements.

Content interesse 01
Back to the top